PIC 40 pin Development Board

Please Choose:









PIC Development Board for MICROCHIP PIC 40 Pin microcontroller. Can be used with most MICROCHIP PIC 40 pin MCUs. It is ideal for learning PIC microcontrollers.

Availibility:

In Stock

Warranty:

6 Months

Model:

RKI-1007

Downloads:

Tell a Friend Ask a question

Price: Starting at $9.00 Only

Quantity:

PIC 40 Pin development Board is ideal for for learning PIC microcontrollers. This board contains requirements like LEDs, Switches, in system programming, RS232 communication, etc . All Ports of controller are accessible though standard 10 pin FRC connector or simple header pins. Also 34*11 general purpose area of normal grid is provided for extra development on the same board.

This Package Includes

  • PIC 40 pin Development Board
  • CD containing all required software's

*Note: Microcontroller, Motor driver Ic's, Programmer etc. is optional and not included in base price. Select this items from drop down menu below product image. 

Board Features

  • On Board Regulator with filters and Operating voltage from 6V - 20 V
  • 8 LED's on PORTA selectable though DIP switch
  • 4 Switches including reset
  • Power Indicator LED
  • 20MHz crystal for maximum speed
  • In system programming through External Serial Programmer
  • Selectable MCU's between PIC16F877, PIC18F4550, PIC18F4520, PIC18F4685
  • USART connector for External RS-232 Link PC (Selectable - See options above)
  • 34*11 Standard general purpose area
  • 4 ADC/Standard servo compatible connectors
  • USB Connector for PIC MCU's like 18F4550 which supports USB2.0
  • All ports accessible through standard 10 pin FRC connector and 10 pin male header (Including VCC and GND)
  • All required connectors included.

PIC16F877 Features

  • High-Performance RISC CPU:

    • Only 35 single-word instructions to learn
    • All single-cycle instructions except for program branches
    • Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle
    • Up to 8K x 14 words of Flash Program Memory, Up to 368 x 8 bytes of Data Memory (RAM), Up to 256 x 8 bytes of EEPROM Data Memory
    • Pinout compatible to other 28-pin microcontrollers

  • Peripheral Features:

    • Timer0: 8-bit timer/counter with 8-bit prescaler
    • Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock
    • Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
    • Two Capture, Compare, PWM modules
      - Capture is 16-bit, max. resolution is 12.5 ns
      - Compare is 16-bit, max. resolution is 200 ns
      - PWM max. resolution is 10-bit
    • Synchronous Serial Port (SSP) with SPI™ (Master mode) and I2C™ (Master/Slave)
    • Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection
    • Parallel Slave Port (PSP) – 8 bits wide with external RD, WR and CS controls (40/44-pin only)
    • Brown-out detection circuitry for Brown-out Reset (BOR)

  • Analog Features:

    • 10-bit, up to 8-channel Analog-to-Digital Converter (A/D)
    • Brown-out Reset (BOR)
    • Analog Comparator module with:
      - Two analog comparators
      - Programmable on-chip voltage reference (VREF) module
      - Programmable input multiplexing from device inputs and internal voltage reference
      - Comparator outputs are externally accessible Special Microcontroller Features

    • 100,000 erase/write cycle Enhanced Flash program memory typical

    • 1,000,000 erase/write cycle Data EEPROM memory typical
    • Data EEPROM Retention > 40 years
    • Self-reprogrammable under software control
    • In-Circuit Serial Programming™ (ICSP™) via two pins
    • Single-supply 5V In-Circuit Serial Programming
    • Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
    • Programmable code protection
    • Power saving Sleep mode
    • Selectable oscillator options
    • In-Circuit Debug (ICD) via two pins

  • CMOS Technology:

    • Low-power, high-speed Flash/EEPROM technology
    • Fully static design
    • Wide operating voltage range (2.0V to 5.5V)
    • Commercial and Industrial temperature ranges
    • Low-power consumption

PIC18F4520, PIC18F4550 and PIC18F4685 Features

PIC18F4520

PIC18F4550

PIC18F4685

Optional items

  • PIC Microcontroller (Selectable between PIC16F877A, PIC 18F4520, PIC 18F4550 & PIC 18F4685)
  • PC-MCU link selectable (Selectable between Serial and USB Port)
  • PIC Programmer (Selectable between Serial Port Programmer and ICSP + Stand alone programmer.)
  • Links to the optional Items

Download

PIC16F877A Datasheet
PIC18F4550 Datasheet
PIC18F4685 Datasheet
PIC18F4520 Datasheet
  • Model: RKI-1007

Product 4/22

Previous
Return to the Product List
Next
Your IP Address is: 54.242.233.11
Copyright 2008 : Robokits World. Best Viewed in 1024 X 768 resolution & 32 Bit Color.